| Product Information | |
| Cat#No# | Ax-019C |
| Product Overview | Low-pressure chromatography columns, in sizes 50 to 200 mm inner diameter (i.d.), offer automated column packing that enables fast start-up, reproducible results, and maximized uptime. |
| Characteristic | Scalable from process development to full-scale production on the same platform. Intelligent Packing, a feature of the UNICORN control software, enables the automated column packing and delivers verified methods and simplified workflows. Optimized for modern chromatography resins, like Capto and MabSelect SuRe families. Rotating pivot stand for easy emptying, safer operation, and convenient access to bed supports and O-rings. Design enabling easy sanitization with materials recognized for use in GMP environments. Wetted and pressure-retaining parts are traceable and polymers are approved according to USP class VI, 21 CFR 177 and Animal free origin or in compliance with EMEA/410/ Supported with IQ/OQ documentation packages. |
| Maximum operating pressure | 10 bar (145.03 psi) |
| Recommended column height | 100-300 mm |
| Autoclavable | 121°C for 30 min, except for the bed support (and distributor for 100-200mm) |
| Storage | 2°C-30°C |
| Column i.d. | 50 mm |
| Adapter Movement | Internal hydraulic |
| Bed support | 20 μm Stainless Steel |
| Bed Volume Max. | 0.59 l |
| Bed Volume Min. | 0.20 l |
| Column Cross Section Area | 19.6 cm2 |
| Connections | 5/16" female |
| Footprint | 352 x 352 mm (foot), 350 x 360 mm (stand) |
| Material (bed support) | 316L Stainless Steel (SS) |
| Material (Distributor) | EN 1.4462 (Duplex) |
| Material (Lid) | 316L Stainless Steel (SS) |
| Material (Seal) | Ethylene propylene diene (EPDM), Fully Fluorinated Propylene Monomer (FFPM/FFKM), Ultra high molecular weight polyetheylene (UHMWPE). |
| Material (Stand) | PolyOxyMethylene (POM-C), Stainless steel 316 (SS) |
| Weight | 6.5 kg |
| Porosity | 20 µm. For 10 µm contact local sales representative. |
| Surface Finish, Stainless Steel Internal Wetted | Ra Electropolished'< 0.5 µm |
| Surface Finish Stainless Steel Non-Wetted Parts | Ra Electropolished < 3 µm |
| Weight Column Stand | 7 kg |
| Material (column hardware) | Borosilicate glass |
Download Datasheet |
|
For Research Use Only. Not intended for any clinical use. No products from Creative BioMart may be resold, modified for resale or used to manufacture commercial products without prior written approval from Creative BioMart.Online Inquiry