| Cat# | Product Name | Size | Price | Qty | Inquiry |
|---|---|---|---|---|---|
| C-007C | Chromaflow columns | Inquiry |
| Product Information | |
| Cat#No# | C-007C |
| Product Overview | A family of convenient process-scale columns with a patented nozzle in the top and bottom of the column that allows packing, unpacking, and cleaning in place. Chromaflow columns are a natural choice when scaling up from BPG columns. |
| Description | Chromaflow columns are a family of convenient to use, process-scale columns. A patented nozzle in the top and bottom of the column allows packing, unpacking, and cleaning when fully assembled, that is with the lid in place. |
| Characteristic | For capture or intermediate purification. Scalable up to 2 m in diameter. Easy to operate and maintain. Packing knowledge and application support available. Convenient, pack-in-place nozzle. Closed system improves safety. Easy-to-use Chromaflow packing station facilitates packing procedure. All plastomers in contact with process flow are tested and approved to USP Class VI. All metallic materials in construction are fully traceable. Installation and Operational Qualification Documentation Packages and service and maintenance contacts available. |
| Maximum operating pressure | 3 bar (43.51 psi) |
| Recommended column height | 200-400 mm |
| Temperature stability | 4°C-30°C |
| Sanitization | 1. Circulate 1.5 CV of 20% acetic acid at a low flow velocity (60 cm/h) for 15 min, upward flow. Then reverse the flow for 15 min. 2. Repeat this procedure with 1.0 M NaOH. 3. Following step 2, slowly circulate 1.0 M NaOH in the column for 60 min. 4. Re-equilibrate the column with a storing or starting buffer. |
| Column i.d. | 400 mm |
| Adapter Movement | Manual |
| Bed support | Net |
| Bed Volume Max. | 51 l |
| Bed Volume Min. | 26 l |
| Column Cross Section Area | 1260 mm2 |
| Connections | 25 mm TC |
| Footprint | 700 x 700 mm |
| Material (bed support) | 316L and S32205 Stainless Steel (SS) |
| Material (column tube) | Acrylic PMMA |
| Material (Distributor) | Polypropylene (PP) |
| Material (Lid) | 316L Stainless Steel (SS) |
| Material (Seal) | Ethylene Propylene Diene (EPDM) and FEP Encapsulated Silicone. |
| Material (Stand) | 316 Stainless Steel (SS) |
| Weight | 230 kg |
| Porosity | 10 µm |
| Surface Finish, Stainless Steel Internal Wetted | Ra Electropolished'< 0.5 µm |
| Surface Finish Stainless Steel Non-Wetted Parts | Ra < 3 µm |
| Outer Height | 1568 mm |
Download Datasheet
|
|
For Research or Industrial Raw Materials, Not For Personal Medical Use!Online Inquiry
