Product Information | |
Cat#No# | Ma-333C |
Product Overview | MabSelect Xtra, with extra high dynamic binding capacity, is a protein A resin developed to meet the demands of increasing levels of expression in monoclonal antibody feedstocks. Higher dynamic binding capacity than currently available Protein A chromatography resins. Improved process economics through reduced raw materials costs and/or reduced number of cycles. High purity capture due to high ligand selectivity and matrix hydrophilicity. Slightly lower pressure/flow properties compared to MabSelect SuRe and MabSelect. Resin fulfills industrial demands for security of supply, robust performance, and regulatory support. |
Description | MabSelect Xtra is a recombinant protein A-based affinity medium engineered to give an exceptionally high dynamic binding capacity for monoclonal antibodies. In addition, MabSelect Xtra is optimized for Fc-fusion proteins. Higher capacity translates directly to lower cost of production. |
Characteristic | High dynamic binding capacity and suitable for highexpression feedstocks. Improved process economics through reduced raw materials costs and/or reduced number of cycles. Very low, unspecific binding due to high ligand selectivity and matrix hydrophilicity. High capacity for many Fc-fusion proteins. |
Ligand Coupling Method | Epoxy activation |
Matrix | Highly cross-linked agarose |
Average particle size | ~75 µm |
Ligand | Recombinant protein A (E.coli) |
Coupling chemistry | Epoxy |
Dynamic binding capacity | Approx. 40 mg human lgG/mL at 2.4 min residence time |
Recommended flow rate | 100–300 cm/h |
Chemical stability | Stable in all aqueous buffers commonly used in protein A chromatography: 0.1 M 20% sodium citrate/HCl (pH 3), 6 M Gua-HCl, 6 M urea, 20% ethanol, 2% benzyl alcohol. |
pH working range | 3–10 |
CIP stability | 2–12 |
Temperature stability | 2°C–40°C |
Storage | 2 to 8°C, 20% Ethanol |
Shipping | 20% ethanol |
Cleaning-in-place | Wash with 2 column volumes of 100 mM 1-Thioglycerol pH 8.5 followed by CIP with 2 column volumes of 15 mM NaOH. Use a contact time of 15 min for each step. Wash immediately with at least 5 column volumes of sterile filtered binding buffer at pH 7–8. Reversed flow direction. |
Sanitization | Sanitization reduces microbial contamination of the bed to a minimum. Equilibrate the column with a solution of 2% hibitane digluconate and 20% ethanol. Allow to stand for 6 hours, then wash with at least 5 column volumes of sterile binding buffer. Equilibrate the column with a solution of 0.1 M acetic acid and 20% ethanol. Allow to stand for 1 hour, then wash with at least 5 column volumes of sterile binding buffer. Equilibrate the column with 70% ethanol. Allow to stand for 12 hours, then wash with at least 5 column volumes of sterile binding buffer. |
Pack size | 200 mL |
Maximum flow velocity | 300 cm/h |
Download Datasheet |
For Research Use Only. Not intended for any clinical use. No products from Creative BioMart may be resold, modified for resale or used to manufacture commercial products without prior written approval from Creative BioMart.
Online Inquiry